Peri

Transcript

DOMINO The lightweight Panel Formwork for forming without a crane Edition 01/2010 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)73 09.9 50-0 Fax+49 (0)73 09.9 51-0 [email protected] www.peri.com Important Notes: Without exception, all current safety regulations must be observed in those countries where our products are used. The illustrations in this brochure are photographs of real site situations. Safety or formwork anchor details are therefore not to be taken as a definitive guide to the way the equipment is to be used. Safety instructions and load specifications are to be strictly observed at all times. Separate structural calculations are required for any deviations from the standard design data. The information contained herein is subject to technical changes in the interests of progress. Errors and typographical mistakes reserved. Content 2 DOMINO The lightweight panel formwork for forming without a crane 4 Corners, T-junctions, Fillers 6 Accessories for quick and simple forming 8 Components 24 PERI International 1 DOMINO The lightweight panel formwork for forming without a crane DOMINO is the lightweight panelized formwork system with elements made of steel or aluminium for smaller residential and civil engineering projects. Only four panel widths This means any ground plan can be formed. The 0.75 m element is also available as a multi-purpose panel. 250 x 100 in steel and aluminium 250 x 75 in steel and aluminium 250 x 50 in steel 250 x 25 in steel DOMINO DRS Alignment Coupler It fastens, aligns and tightens in a single operation. Whether on standard panel connections ... 2 ... or with filler timbers up to 120 mm wide. DOMINO DKS Wedge Coupler For the standard panel joint at foundations. DOMINO panels are extremely light yet withstand a high load. The 250 x 100 panel in aluminium weighs only 59 kg. The DKS Wedge Coupler for standard panel joints with normal requirements. High allowable fresh concrete pressure For concreting heights up to 2.50 m, the DOMINO has been designed for the full hydrostatic pressure according to DIN 18202, table 3, line 7 (steel elements) and line 6 (aluminium panels). For greater heights a fresh concrete pressure of 60 kN/m2 (steel panels) is allowable in compliance with DIN 18202, table 3, line 6. This allows quick concreting and ensures very flat concrete surfaces. At greater heights (extended forms) the aluminium panels must only be used as extension panels at the top. – Only 2 ties needed for concreting heights up to 2.50 m. This means 1.25 m² of wall area per tie. – The DOMINO DG 85 scaffold bracket for an 850 mm wide concreting scaffold. The maximum bracket spacing is an economical 2.00 m under an imposed load of 150 kg/m². DOMINO form with push-pull props and concreting platform ready for use. 3 DOMINO standard application Corners, T-junctions, Fillers The 50 panel and the DAW external corner angle form the external corner. Together with the DWD 5 compensator, wall thicknesses from 150 to 350 mm in 50 mm increments are possible. DWD 5 Basic rules for corners: Outside: Panel D 50 Corner Angle DAW Inside: Articulated Corner DGE Adjusted to wall thickness with DWD compensator or timber. Filler timber 1 cm DAR 80 2 DWD 5 DAR 80 35 30 DWD 5 DAR 80 DWD 5 External Corner DAW 24 20 Corners 2 DWD 5 Compensation Waler DAR 80 D 50 25 D 50 25 DGE Two DRS alignment couplers are needed at the internal corner and the standard panel joint. 4 Four DOMINO DRS alignment couplers are needed on each side of the external corner. T-Junctions 20 The 75 panel and the articulated corner form the T-junction. Together with the DWD 5 compensator, wall thicknesses from 150 to 350 mm in 50 mm increments are possible. DWD 5 Basic rules for T-junctions: Outside: Panel D 75 Inside: Articulated Corner DGE Adjusted to wall thickness with DWD compensator or timber. 24 Filler timber 1 cm DGE 25 DGE 30 D 75 Length adjustments DWD 5 35 DWD 5 Up to 300 mm with filler support DPA and compensation waler DAR 80 Up to 120 mm with DOMINO DRS alignment coupler and filler timber. 5 DOMINO Accessories for quick and simple forming All of the cross struts of the DOMINO panelss have connecting holes for accessories. These details allow to shutter fast the easy way. Push-Pull Prop Connector DRA For connecting push-pull props and kicker braces to horizontal and vertical struts. The coupler with captive wedge makes erection very easy. DOMINO Stacking Device makes handling with the crane and stacking on site easier. The stacks can also be moved with a fork-lift truck. 8 panels of a particular size can be stacked quickly and safely. DOMINO Scaffold Bracket DG 85 The Scaffold Bracket DG 85 for an 850 mm wide concreting scaffold. Simply hook in and lock with pin. DOMINO Lifting Hook Safe working load: 500 kg For lifting upright single panels or units. Always use 2 hooks for each unit being moved. Large units can be moved with the DOMINO Lifting Hook. Moving a stack of panels with DOMINO stacking device. 6 The 1.25 m high DOMINO panels have inset tie points and can be used on their sides without any problems. 0,75 m 1,25 m DOMINO elements are also extremely suitable for forming foundations. One major benefit is the inset tie points of the 1.25 m high panel. These allow even foundation forms to be tied easily. Wall footings and single-column footings with the foundation tie spanner and tie bracket. – The DOMINO foundation tie clamp for shuttering foundations easily and replaces the bottom tie position and saves work space and hence earthworks. – Ties are tensioned accurately with a self-cleaning hexagonal spindle. – Using the top tie bracket for the top tie point avoids the DOMINO panels having to be aligned exactly. It is possible to tie at any position on the panel. Strip foundations and single footings with the DLS foundation tie spanner (below) and DAH tie bracket (above). Foundation Tie Clamp DLS Item no. 066090 Perforated Foundation Tie, 25 m roll Item no. 023020 Top Tie Bracket DAH Item no. 066086 7 DOMINO Panel Formwork Panel D 250 x 100 Panel with steel frame and formlining 15 mm. 2500 530 1440 530 Item no. Weight kg 066020 87,700 1000 71,600 Panel D 250 x 75 Panel with steel frame and formlining 15 mm. 2500 530 1440 530 066022 117 750 54,500 Panel D 250 x 50 Panel with steel frame and formlining 15 mm. 2500 530 1440 530 066025 117 500 8 117 DOMINO Panel Formwork Panel D 250 x 25 Panel with steel frame and formlining 15 mm. 2500 530 1440 530 Item no. Weight kg 066026 37,700 250 59,500 Panel DA 250 x 100 Panel with aluminium frame and formlining 15 mm. 2500 530 1440 530 066021 117 1000 2500 530 Panel DA 250 x 75 Panel with aluminium frame and formlining 15 mm. 1440 47,500 530 066023 117 750 117 9 DOMINO Panel Formwork Item no. Weight kg 76,500 50,200 Multi Panels DM/DMA 250 Multi Panel DM 250 x 75 Multi Panel DMA 250 x 75 Panel Steel/Alu with formlining 15 mm. For oblique angles, wall connections etc.. Complete with 46 x 030290 Plug Ø 20 mm 2500 1440 530 066024 066032 750 22 x 30 = 660 45 39,000 Articulated Corner DGE 250 Made of aluminium. For oblique angles from 75° for the outside and inside. Complete with 2 x 066100 Corner Locking DEA 90° 2500 1440 530 066029 117 530 45 250 250 530 117 250 7,820 11,600 Wall Thickness Compensations DWD 250 Wall Thickness Compensation DWD 250 x 5 Wall Thickness Compensation DWD 250 x 10 For adaptating to different wall thicknesses. 2500 10 50 27 100 117 530 27 117 1440 530 066030 101986 DOMINO Panel Formwork Outside Corner Angle DAW 250 For panel connection at 90° external corners. 2500 Item no. Weight kg 066028 10,500 117 117 4,150 Filler Support DPA 250 For infillings with 21 mm plywood. 45 Shaft Panel DSE 275 For lifting complete internal formwork in shafts. Safety instructions Load-bearing point: max. capacity 2.0 t. 500 117 148,000 2750 111603 93 / 87 2490 066033 11 DOMINO Panel Formwork Item no. Weight kg 111665 4,360 Spindle Shaft Panel DSE For use with Shaft Panel DSE. For spindling back to the starting position. 1 piece per Shaft Panel DSE. Complete with 2 x 105822 Pin Ø 20 x 102, galv. 2 x 022230 Cotter Pin 5/1, galv. Note Spanner size SW 24. SW 24 230 66 150 16,200 17,900 Stopend Panels DOMINO AT 250 Stopend Panel DOMINO AT 250 x 3 Stopend Panel DOMINO AT 250 x 5 Outside piece for stopend formwork. Note Concrete cover approx. 30 or 50 mm. 2500 101927 108855 248 AT 250 x 3 27,100 31,200 36,000 39,700 Stopend Panels DOMINO MTF 250 Stopend Panel DOMINO MTF 250 x 20 Stopend Panel DOMINO MTF 250 x 24/25 Stopend Panel DOMINO MTF 250 x 30 Stopend Panel DOMINO MTF 250 x 35/36 With water stop bar for stopend formwork. B 118 158 218 268 2500 101928 101929 101930 101931 120 B 12 117 210 117 210 AT 250 x 5 DOMINO Panel Formwork Panel D 125 x 100 Panel with steel frame and formlining 15 mm. 930 280 1250 40 Item no. Weight kg 066040 47,300 1000 38,700 Panel D 125 x 75 Panel with steel frame and formlining 15 mm. 930 40 240 1250 40 066041 117 750 28,600 Panel D 125 x 50 Panel with steel frame and formlining 15 mm. 930 280 1250 40 066043 117 500 930 40 Panel D 125 x 25 Panel with steel frame and formlining 15 mm. 1250 18,600 280 066044 117 250 117 13 DOMINO Panel Formwork Panel DA 125 x 100 Panel with aluminium frame and formlining 15 mm. 930 280 1250 40 Item no. Weight kg 066050 31,000 1000 24,800 Panel DA 125 x 75 Panel with aluminium frame and formlining 15 mm. 930 40 240 750 43,700 27,300 Multi Panels DM/DMA 125 Multi Panel DM 125 x 75 Multi Panel DMA 125 x 75 Panel Steel/Alu with formlining 15 mm. For oblique angle, wall connections etc.. 117 Complete with 46 x 030290 Plug Ø 20 mm 22 x 30 = 660 45 117 1250 750 45 280 932 38 066042 066052 1250 40 066051 117 21,300 Articulated Corner DGE 125 Made of aluminium. For oblique angles from 75° for the outside and inside. Complete with 1 x 066100 Corner Locking DEA 90° 40 066047 250 250 117 930 280 14 1250 250 DOMINO Panel Formwork Item no. Weight kg 4,030 5,940 Wall Thickness Compensators DWD 125 Wall Thickness Compensator DWD 125 x 5 Wall Thickness Compensator DWD 125 x 10 For adaptating to different wall thicknesses. 5,490 100 Outside Corner Angle DAW 125 For panel connection at 90° external corners. 1250 066046 27 117 50 117 27 280 930 1250 40 066048 101964 117 117 77,100 Shaft Panel DSE 125 For lifting complete internal formwork in shafts. Safety instructions Load-bearing point: max. capacity 2.0 t. 500 117 111655 45 93 / 87 Filler Support DPA 125 For infillings with 21 mm plywood. 1250 2,070 1240 066053 15 DOMINO Panel Formwork Item no. Weight kg 8,140 8,980 Stopend Panels DOMINO AT 125 Stopend Panel DOMINO AT 125 x 3 Stopend Panel DOMINO AT 125 x 5 Outside piece for stopend formwork. Note Concrete cover approx. 30 or 50 mm. 1250 AT 125x3 210 117 210 14,600 15,200 17,500 19,300 Stopend Panels DOMINO MTF 125 Stopend Panel DOMINO MTF 125 x 20 Stopend Panel DOMINO MTF 125 x 24/25 Stopend Panel DOMINO MTF 125 x 30 Stopend Panel DOMINO MTF 125 x 35/36 With water stop bar for stopend formwork. B 118 158 218 268 B 120 1250 101935 101936 101937 101940 Panel D 75 x 25 Panel with steel frame and formlining 15 mm. 280 750 12,100 430 40 066064 250 Panel D 75 x 50 Panel with steel frame and formlining 15 mm. 280 430 40 19,300 117 750 066063 500 Panel D 75 x 75 Panel with steel frame and formlining 15 mm. 750 16 750 26,600 117 280 430 40 066061 AT 125x5 117 117 101934 108856 DOMINO Panel Formwork 280 430 40 Panel D 75 x 100 Panel with steel frame and formlining 15 mm. 750 Item no. Weight kg 066060 32,400 1000 066062 31,600 Multi Panel DM 75 x 75 Panel with steel frame and formlining 15 mm. For oblique angles, wall connections, stopend formwork etc. 117 Complete with 23 x 030290 Plug Ø 20 mm 45 117 750 22 x 30 = 660 280 432 38 750 45 066067 12,800 Articulated Corner DGE 75 Made of aluminium. For oblique angles from 75° for the outside and inside. Complete with 1 x 066100 Corner Locking DEA 90° 117 Wall Thickness Compensator DWD 75 x 5 For adaptating to different wall thicknesses. 27 50 117 280 430 40 2,520 066066 3,500 250 750 066068 250 750 280 430 40 250 Outside Corner Angle DAW 75 For panel connection at 90° external corners. 117 750 117 Corner Locking DEA 90° For 90° inside corners. 120 165 1,470 60 066100 120 17 DOMINO Panel Formwork Item no. Weight kg 066095 1,060 Positioning Pin DGE 135° internal For 135° internal corners. Complete with 2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 308 40 M 12x40 066097 1,560 Positioning Pin DGE 135° external For 135° external corners. Complete with 2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 470 40 M 12x40 066080 3,630 Alignment Coupler DRS For all DOMINO panel connections. Compensations up to 12 cm possible. 61 127 max 173 288 1,160 Wedge Clamp DKS For standard DOMINO panel connections not under high load. 151 133 25 066081 259 109 066084 8,510 Compensation Waler DAR 80 For length compensations, height extensions, stopend formwork and special applications for DOMINO. With captive connection components. 60 40 18 165 112 40 790 DOMINO Panel Formwork Item no. Weight kg 066085 6,570 Scaffold Bracket DG 85 For assembly of working and concreting scaffolds for DOMINO. Technical Data Permissible load 150 kg/m2 with maximum width of influence 2.00 m. 45 653 1044 106877 2,730 Accessories Guardrail Post HSGP Guardrail Post Holder DOMINO For assembly of guardrails on DOMINO panels. Complete with 1 x 018060 Cotter Pin 4/1, galv. Technical Data Maximum width of influence 2.00 m. 28 3,520 146 213 349 034580 142 3,520 034580 3,520 Accessories Guardrail Post HSGP Guardrail Post HSGP As guardrail for different systems. 65 Stopend Tie-2 DSA For transferring forces from the stopend formwork to the DOMINO panels. Thread DW 15. 95 DW 15 443 174 2,100 150 110406 35 1300 1050 440 120 034580 19 DOMINO Panel Formwork Brace Connector DRA For connecting push-pull props and kickers to DOMINO panels. Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Ø16x42 120 Plug Ø 20 mm For sealing tie holes Ø 20 mm, which are not required. Note Delivery unit 500 pieces. Ø25 0,002 98 Ø21 030290 68 117 Item no. Weight kg 066082 1,040 13 027680 49,600 Connector SB-1,2 - MX/TR/D For assembling Brace Frame SB-1,2 to MAXIMO, TRIO and DOMINO panels. Safety instructions Load-bearing point load capacity 1.0 t with a crane sling angle ≤ 15°. 240 490 650 1770 max 1650 min 1270 120 265 160 60 250 21 0,368 2,400 0,433 1,250 025740 9,140 Accessories Bolt Ø 19 x 165, galv. Hook Strap SB-1, 2 Bolt SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Connector SB-A, B, C - MX/TR/D For assembling SB-A0, A, B, C to MAXIMO, TRIO and DOMINO panels. Note One for each tie point. 125 027690 113255 114107 20 0,368 0,433 1,250 Accessories Bolt Ø 19 x 165, galv. Bolt SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. 120 130 027690 027590 113255 114107 130 DOMINO Panel Formwork Item no. Weight kg 027690 0,368 Bolt Ø 19 x 165, galv. For panel formwork with 12 cm overall height. 165 125 Ø19 066090 2,480 Foundation Tie Clamp DOMINO DLS For anchoring foundation formwork in combination with the Perforated Foundation Tie. Note Spanner size SW 14. 152 0,676 Perforated Foundation Tie, 25 m roll For use with Foundation Tie Clamp TRIO, DOMINO and HANDSET. Technical Data Permissible tension force 12,9 kN 20 50 023020 34 170 SW 14 50 066086 1,100 22 Top Tie Bracket DAH, galv. For tying at any position outside of the frame, particularly for foundations. 100 Ø20,5 100 80 112 Safety instructions Always use 2 pieces per transportation unit. Follow Instructions for Use. Load capacity 500 kg. 195 Lifting Hook DOMINO 500 kg For transporting DOMINO panels. 512 6,330 55 066091 88 187 100 21 DOMINO Panel Formwork Stacking Device DOMINO, galv. For stacking and transportation of 2-8 DOMINO panels of all sizes. Suitable for crane and fork-lift transportation. 4 pieces per stack. Safety instructions Follow Instructions for Use. Load-bearing capacity: 250 kg per device, 1 t per stack. Stacking Device DOMINO DSH Plastic. Prevents the element from sliding sideways. 30 0,020 19 066093 125 100 1115 Item no. Weight kg 066094 7,980 55 066099 0,030 Stacking Aid DOMINO DSW For stacking DOMINO panels. 4 pieces per stack. 22 50 49 50 23 PERI International 42 19 20 22 32 34 18 38 11 52 6 01 PERI GmbH Rudolf-Diesel-Strasse 89264 Weissenhorn info @ peri.com www.peri.com 21 1 5 17 2 46 30 3 16 13 29 28 9 53 24 48 4 41 61 33 02 France PERI S.A.S. 77109 Meaux Cedex [email protected] www.peri.fr 09 Italy PERI S.p.A. 20060 Basiano (MI) [email protected] www.peri.it 16 Austria PERI Ges.mbH 3134 Nußdorf ob der Traisen offi[email protected] www.peri.at 23 Korea PERI (Korea) Ltd. Seoul 135-080 [email protected] www.perikorea.com 29 Slovania PERI SLOWENIEN 2000 Maribor [email protected] www.peri.de 03 Switzerland PERI AG 8472 Ohringen [email protected] www.peri.ch 10 Japan PERI Japan K.K. Tokyo 103-0015 [email protected] www.perijapan.jp 17 Czech Republic PERI spol. s r.o. 252 42 Jesenice [email protected] www.peri.cz 24 Portugal PERIcofragens Lda. Linda-a-Pastora 2790-326 Queijas [email protected] www.peri.pt 30 Slovakia PERI spol. s r.o. 903 01 Senec [email protected] www.peri.sk 04 Spain PERI S.A. Sociedad Unipersonal 28110 Algete/Madrid [email protected] www.peri.es 11 United Kingdom/Ireland PERI Ltd. Rugby, CV23 0AN [email protected] www.peri.ltd.uk 18 Denmark PERI Danmark A/S 2670 Greve [email protected] www.peri.dk 05 Belgium/Luxembourg N.V. PERI S.A. 1840 Londerzeel [email protected] www.peri.be 12 Turkey PERI Kalıp ve İskeleleri Kıraç - Büyükçekmece/ Istanbul 34500 [email protected] www.peri.com.tr 19 Finland PERI Suomi Ltd. Oy 05460 Hyvinkää info@perisuomi.fi www.perisuomi.fi 06 Netherlands PERI B.V. 5480 AH-Schijndel [email protected] www.peri.nl 13 Hungary PERI Kft.. 1181 Budapest [email protected] www.peri.hu 14 Malaysia 07 USA PERI Formwork Malaysia PERI Formwork Systems, Inc. 43300 Seri Kembangan, Elkridge, MD 21075 Selangor DE [email protected] [email protected] www.peri-usa.com www.perimalaysia.com 08 Indonesia PT Beton Perkasa Wijaksana 15 Singapore PERI ASIA Pte. Ltd Jakarta 10210 Singapore 387355 [email protected] [email protected] www.peri.de www.periasia.com 24 20 Norway PERI NORGE AS 3036 Drammen [email protected] www.peri.no 21 Poland PERI Polska Sp. z o.o. 05-860 Płochocin [email protected] www.peri.pl.pl 22 Sweden PERIform SVERIGE AB 30013 Halmstad [email protected] www.periform.se 25 Argentina PERI S.A. (1625) Escobar/Prov. Bs. As. [email protected] www.peri.com.ar 26 Brazil PERI Formas e Escoramentos Ltda. CEP 06730-000 Vargem Grande Paulista São Paulo [email protected] www.peribrasil.com.br 27 Chile PERI Chile Ltda. Colina, Santiago de Chile [email protected] www.peri.cl 28 Romania PERI România SRL 077015 Baloteşti - ILFOV [email protected] www.peri.ro 31 Australia PERI Australia Pty. Ltd. Glendenning NSW 2761 [email protected] www.periaus.com.au 32 Estonia PERI AS 76406 Saku vald Harjumaa [email protected] www.peri.ee 33 Greece PERI Hellas Ltd. 194 00 Koropi [email protected] www.perihellas.gr 34 Latvia PERI SIA 1057 Riga [email protected] www.peri-latvija.lv 35 United Arab Emirates PERI (L.L.C.) Dubai [email protected] www.perime.com 12 44 36 43 7 50 39 60 49 47 23 51 37 40 57 56 54 58 59 35 10 55 63 14 15 8 26 62 27 31 45 25 42 Iceland 36 Canada MEST ltd., PERI Formwork Systems, Inc. 220 Hafnarfjordur Bolton, Ontario [email protected] L7E 1K1 www.mest.is [email protected] www.peri.ca 43 Kazakhstan TOO PERI Kazakhstan 37 Libanon 050010 Almaty PERI GmbH [email protected] Beirut www.peri.kz P.O. Box 90 416 Jdeidet [email protected] 44 Russian Federation www.peri.de OOO PERI 142403 Noginsk 38 Lithuania [email protected] PERI UAB www.peri.ru 02300 Vilnius [email protected] 45 South Africa www.peri.lt PERI Wiehahn (Pty.) Ltd. Bellville 7535 39 Marocco [email protected] PERI S.A. www.periwiehahn.co.za Tanger [email protected] 46 Ukraine www.peri.de TOW PERI Ukraina 07400 Brovary 40 Israel [email protected] PERI Formwork www.peri.ua Engineering Ltd 49002 Israel 47 Egypt [email protected] PERI GmbH www.peri.co.il 11361 Heliopolis Cairo 41 Bulgaria [email protected] PERI BULGARIA EOOD www.peri.com.eg 1839 – Sofia [email protected] 48 Serbia www.peri.bg PERI Oplate d.o.o. 11272 Dobanovci offi[email protected] www.peri.co.yu 49 Mexico PERI Cimbras y Andamios, S.A. de C.V. Estado de México, C.P. 54680 [email protected] www.peri.com.mx 50 Azerbaijan PERI Kalıp ve İskeleleri Baku [email protected] www.peri.com.tr 51 Turkmenistan PERI Kalıp ve İskeleleri 744035 Aşgabat [email protected] www.peri.com.tr 52 Belorussia PERI Belarus 220030 Minsk [email protected] www.peri.com.tr 53 Croatia PERI oplate i skele d.o.o. 10 250 Donji Stupnik/ Zagreb [email protected] www.peri.com.hr 54 Iran PERI GmbH Building No. 4 P.O. Box 1939793669 Teheran-Iran [email protected] www.peri.ir 55 India PERI (India) Pvt Ltd Mumbai – 400064 [email protected] www.peri.in 62 Peru PERI Peruana SAC Lima/Peru [email protected] www.peri.com.pe 56 Jordan PERI Jordan 11947 Amman [email protected] www.peri.de 63 Panama PERI Panama Inc. 587 Panama City [email protected] www.peri.com.pa 57 Kuwait PERI Kuwait 13011 Kuwait [email protected] www.peri.de 58 Saudi Arabia PERI Saudi Arabia Jeddah - 21463 K.S.A [email protected] www.peri.de 59 Qatar PERI Qatar LLC Doha [email protected] www.peri.de 60 Algeria Société PERI S.A.S. Kouba - Alger [email protected] www.peri.fr 61 Albania Autostrada TIRANE-DURRES Tirane / ALBANIA [email protected] www.peri.com.tr 25 Wall Formwork Panel Formwork Girder Formwork Circular Formwork Facade Formwork Brace Frame Climbing Systems Climbing Scaffold Self-Climbing System Climbing Protection Panel Platform Systems Column Formwork Square Rectangular Circular Scaffold, Stairways, Working Platforms Facade Scaffold Working Platform Weather Protection Roof Stairway Access Slab Formwork Panel Formwork Beam Grid Formwork Girder Formwork Slab Table Beam Formwork Bridge and Tunnel Formwork Cantilevered Parapet Carriage Cantilevered Parapet Platform Engineer’s Construction Kit Shoring Systems Steel Slab Props Aluminium Slab Props Tower Systems Heavy-Duty Props Services Formwork Assembly Cleaning / Repairs Formwork Planning Software Statics Special Constructions Additional Systems Plywood Formwork Girders Stopend Systems Pallets Transportation Containers PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)73 09.9 50- 0 Fax +49 (0)73 09.9 51- 0 [email protected] www.peri.com D e 01/2010 10ma Art.-Nr.: 790352 © Copyright by PERI GmbH PERI Product Range