Transcript
Followers
0
Share
More Next Blog»Create Blog
Sign In
7/8/13tugasan mekanikal: report bengkel CNC EDM DIE SINKING
mienasukasuki.blogspot.com/2011/08/report-bengkel-cnc-edm-die-sinking.html2/4
Die sinking EDM work steps
1. The main switch is open
2. Die sinking EDM controller switches open and the safety button is
released the use of machines
3. Home panels, manual (F2) is pressed
4. coordinates X, Y and Z coordinates are adjusted to adjust the position of
the electrodes
5. cycle start switch is pressed to heat the engine system
Step work PROGRAMMING
1. Oil pump is opened to drain the liquid (oil) which aims to
reduce sparks during cutting.
2. G54 Work coordinate;
3. Absolute coordinate G90;
4. Position Z 50.0;
5. Position X 50.0, Y 50.0;
6. Position Z 0.5
7. Line 3-axis Z I1 B1 -0.5;
8. NG position Z 50.0;
9. Oil pump off
Step work EDIT
1. F1 Edit, input
2. F8 file, input
3. F1 load, input
4. Yes, input
5. Enter the name of data file, input
6. Enter, input
7. F10 exit, input
8. F2 Dialogue, input
9. Key in program, input
10. Exit, input
Step work for EDGING (auto)
1. Manual, input
2. Exit center, F6 input, input
3. Column X, Y, Z, input. Using a ruler, the distance between the
axes at work things are included. Electrodes are moved
automatically to adjust the center position of work objects
4. Ix, the input
5. Ly, the input
6. LZ, input
CNC EDM DIE SINKING MACHINE
7/8/13tugasan mekanikal: report bengkel CNC EDM DIE SINKING
mienasukasuki.blogspot.com/2011/08/report-bengkel-cnc-edm-die-sinking.html3/4
Posted by
miena
at
04:32
7. Cycle start
Safety precautions when handling EDM machines
1. Make sure there are no leaks in the tank dielectric liquid tank hose
and pipe connections.
2. Make sure a fire extinguisher near the machine for use in emergencies.
3. Make sure the materials are installed in areas where the right job.
4. Make sure the electrodes are not touching the thing work.
5. Make sure the cutting wire is not touching things work.
6. Make sure each cable there is no leakage.
7. Clear oily liquid that is in place the working substance during the installation
process.
8. Clean all dirt in the tank desk and storage tanks.
9. Wear appropriate clothing while using machines.
Conclusion
The desired objectives have been successfully implemented. We have
successfully used Die sinking EDM machine with skill and know how to
enter the program and run machine for the design of the products made. In
addition, we also know how to apply the program to form the G-code to
get the result as above. All that was taught to us was really helpful
to our advantage as we go into the working world later.
Recommend this on Google
No comments:
Post a Comment
7/8/13tugasan mekanikal: report bengkel CNC EDM DIE SINKING
mienasukasuki.blogspot.com/2011/08/report-bengkel-cnc-edm-die-sinking.html4/4
Newer PostOlder Post
Home
Subscribe to:
Post Comments (Atom)
Enter your comment...
Comment as:
Google Account
Publish
Preview
suju_T-_rokkugo
Powered by
mp3skull.com
Travel template. Powered by
Blogger
.